Product and Shipment Inspections

Quality Control Inspections in China and Asia

Final Shipment Inspection

New customers just $195 in China!

 

DESCRIPTION: Final Shipment Inspections (FSI) check for quality and quantity issues after production is 80-100% complete; either at the factory, or less often at the freight forwarder or reseller’s warehouse.

 

WHEN TO USE: Use this service if your budget allows for just a single inspection and your main concern is the “quality and quantity” of your product. For greater assurance, add an In-Process Inspection (IPI).

FSI

inspector performing a final shipment inspection in China and Asia

inspector performing an in-process inspection in China and Asia

In-Process Inspection

New customers just $195 in China!

 

DESCRIPTION: In-Process Inspections (IPI) are performed during the production process so that quality issues can be more quickly and easily resolved and any delays in the shipping schedule can be avoided.

 

WHEN TO USE: Use this service if quality control issues could cause shipment delay or unwanted product reworking expense. For greater assurance, consider adding a First Article Inspection (FAI) to this service.

IPI

First Article Inspection

New customers just $195 in China!

 

DESCRIPTION: First Article Inspection (FAI) is the critical analysis of the first item made to verify correct setup, correct process alignment, and to verify that the product is in the correct, specified configuration.

 

WHEN TO USE: Use this service if the first unit manufactured will be representative of all future units produced. For greater assurance, consider adding an In-Process Inspection (IPI) to this service.

FAI

inspector performing a first article inspection in China and Asia

inspector performing a container loading check in China and Asia

Container Loading Check

New customers just $195 in China!

 

DESCRIPTION: Container Loading Checks (CLC) are performed during the loading process to assure the correct quantity of cartons are loaded. If requested, results can usually be reported back in real-time.

 

WHEN TO USE: Use this service if your main concern is receiving the correct number of cartons, or that the cartons are correctly loaded. Please note that this service is not a quality check. See FSI and IPI above.

CLC

MFG Process Supervision

New customers just $195 in China!

 

DESCRIPTION: Manufacturing Process Supervisions (MPS) are performed during production to assure that specified processes are followed, thus avoiding product reworking time/expense later on.

 

WHEN TO USE: Use this service if you have specific concerns or requirements for the actual manufacturing process used.  Adding a Final Shipment Inspection (FSI) to this service is highly suggested.

MFG

Defect Sorting Inspection

New customers just $195 in China!

 

DESCRIPTION: Defect Sorting Inspections (DSI) help avoid product reworking time/expense by sorting out defectives prior to shipment. Defectives are removed and the remaining goods shipped.

 

WHEN TO USE: Use this service if your objective is immediate shipment of the remaining defect-free units. Large quantity shipments will utilize factory labor to assist in the sorting process.

DSI

KRT, Protecting You! ®

Professional Quality Control Inspectors
and Expert Factory Auditors